Ms7860 Ver 12 Motherboard Specs !!top!! Jun 2026

The is a proprietary Micro-ATX motherboard manufactured by MSI for HP ProDesk 400 G1 and G2 desktop series. Based on its H81 or H87 chipset, it supports 4th generation Intel Core processors and uses DDR3 memory. Core Technical Specifications Socket Type : Intel LGA 1150 (Socket H3).

Note: Since the MS-7860 Ver 12 is an OEM board, exact specifications can vary depending on the original system builder (HP, Acer, etc.). Always verify with the specific PC model number (e.g., HP Envy 700-214) before purchasing upgrades.

Affordable memory options compared to newer DDR4/DDR5 standards.

i7 (e.g., i7-4770K), i5 (e.g., i5-4570), i3 (e.g., i3-4130). Budget Series: Pentium and Celeron processors. Workstation: Some versions support Intel Xeon E3-1230 V3. Sysnapse Malaysia Expansion and Storage Expansion Slots: 1x PCI Express x16 (Version 3.0). 3x PCI Express x1. Storage Interface: 4x SATA ports (SATA II/III support for HDD/SSD). КомпБест Connectivity and I/O Ports Video Output: 1x VGA, 1x DVI-D. USB Ports:

Please note that these specs are based on limited information and might not be entirely accurate or up-to-date. Additionally, the MS-7860 Ver 12 motherboard might have some specific features or changes that are not documented here. ms7860 ver 12 motherboard specs

Because the MS-7860 VER 1.2 is an OEM part, it is not available through traditional retailers like Amazon, Best Buy, or Newegg (except through third-party Marketplace sellers). Typical sources include:

The MS-7860 uses the form factor, measuring approximately 24.4 cm (9.6 inches) in width and depth, and 3.5 cm (1.4 inches) in height . This makes it compatible with any standard micro-ATX case, though you may need to supply your own I/O shield if purchasing a replacement board.

3 x 3.5mm audio jacks (Line-In, Line-Out, Microphone).

| Slot | Type | Physical lanes | |------|------|----------------| | PCIe x16 | 3.0 | x16 | | PCIe x4 (open-ended) | 2.0/3.0 | x4 | | PCIe x1 | 2.0 | x1 | | PCI (32-bit) | Legacy | – | The is a proprietary Micro-ATX motherboard manufactured by

2 x SATA 6Gb/s (SATA III) ports and 2 x SATA 3Gb/s (SATA II) ports.

The two DDR3 DIMM slots can accept a maximum of 16GB of RAM using two 8GB sticks. It's important to use based on 256Mx8 or 512Mx8 chips. Using high-density modules intended for later-generation Intel platforms (like 4th Gen AMD) often results in boot failures. For maximum compatibility, install memory in matched pairs (e.g., 2x4GB or 2x8GB) to enable dual-channel mode for better performance.

The is a Micro-ATX (mATX) motherboard designed primarily for HP business desktops, specifically the HP ProDesk 400 G1 and G2 series. It is built around the Intel H81 Express chipset and features an LGA 1150 socket, making it compatible with 4th Generation Intel "Haswell" processors. Technical Specifications

The is a proprietary Micro-ATX (mATX) motherboard manufactured by MSI specifically for Hewlett-Packard (HP) business desktop configurations . Most prominently deployed inside the HP ProDesk 400 G1 and G2 Microtower (MT) series, this board is built on the Intel H81 / H87 Express chipset architecture. It features an LGA 1150 CPU socket , allowing compatibility with 4th generation Intel Core processors. Designed as a reliable, cost-effective workhorse, it balances expansion flexibility with strict enterprise-level power and system efficiency. Technical Overview and Core Specifications Note: Since the MS-7860 Ver 12 is an

Despite its compact M-ATX footprint, the board layout ensures adequate room for critical system additions. Graphics & Expansion

Here is a detailed breakdown of the MS-7860 VER 1.2 specifications.

If you are looking to replace a faulty board in an HP ProDesk 400 G1/G2 MT, this is a direct replacement.

The is a proprietary Micro-ATX motherboard manufactured by MSI for HP ProDesk 400 G1 and G2 desktop series. Based on its H81 or H87 chipset, it supports 4th generation Intel Core processors and uses DDR3 memory. Core Technical Specifications Socket Type : Intel LGA 1150 (Socket H3).

Note: Since the MS-7860 Ver 12 is an OEM board, exact specifications can vary depending on the original system builder (HP, Acer, etc.). Always verify with the specific PC model number (e.g., HP Envy 700-214) before purchasing upgrades.

Affordable memory options compared to newer DDR4/DDR5 standards.

i7 (e.g., i7-4770K), i5 (e.g., i5-4570), i3 (e.g., i3-4130). Budget Series: Pentium and Celeron processors. Workstation: Some versions support Intel Xeon E3-1230 V3. Sysnapse Malaysia Expansion and Storage Expansion Slots: 1x PCI Express x16 (Version 3.0). 3x PCI Express x1. Storage Interface: 4x SATA ports (SATA II/III support for HDD/SSD). КомпБест Connectivity and I/O Ports Video Output: 1x VGA, 1x DVI-D. USB Ports:

Please note that these specs are based on limited information and might not be entirely accurate or up-to-date. Additionally, the MS-7860 Ver 12 motherboard might have some specific features or changes that are not documented here.

Because the MS-7860 VER 1.2 is an OEM part, it is not available through traditional retailers like Amazon, Best Buy, or Newegg (except through third-party Marketplace sellers). Typical sources include:

The MS-7860 uses the form factor, measuring approximately 24.4 cm (9.6 inches) in width and depth, and 3.5 cm (1.4 inches) in height . This makes it compatible with any standard micro-ATX case, though you may need to supply your own I/O shield if purchasing a replacement board.

3 x 3.5mm audio jacks (Line-In, Line-Out, Microphone).

| Slot | Type | Physical lanes | |------|------|----------------| | PCIe x16 | 3.0 | x16 | | PCIe x4 (open-ended) | 2.0/3.0 | x4 | | PCIe x1 | 2.0 | x1 | | PCI (32-bit) | Legacy | – |

2 x SATA 6Gb/s (SATA III) ports and 2 x SATA 3Gb/s (SATA II) ports.

The two DDR3 DIMM slots can accept a maximum of 16GB of RAM using two 8GB sticks. It's important to use based on 256Mx8 or 512Mx8 chips. Using high-density modules intended for later-generation Intel platforms (like 4th Gen AMD) often results in boot failures. For maximum compatibility, install memory in matched pairs (e.g., 2x4GB or 2x8GB) to enable dual-channel mode for better performance.

The is a Micro-ATX (mATX) motherboard designed primarily for HP business desktops, specifically the HP ProDesk 400 G1 and G2 series. It is built around the Intel H81 Express chipset and features an LGA 1150 socket, making it compatible with 4th Generation Intel "Haswell" processors. Technical Specifications

The is a proprietary Micro-ATX (mATX) motherboard manufactured by MSI specifically for Hewlett-Packard (HP) business desktop configurations . Most prominently deployed inside the HP ProDesk 400 G1 and G2 Microtower (MT) series, this board is built on the Intel H81 / H87 Express chipset architecture. It features an LGA 1150 CPU socket , allowing compatibility with 4th generation Intel Core processors. Designed as a reliable, cost-effective workhorse, it balances expansion flexibility with strict enterprise-level power and system efficiency. Technical Overview and Core Specifications

Despite its compact M-ATX footprint, the board layout ensures adequate room for critical system additions. Graphics & Expansion

Here is a detailed breakdown of the MS-7860 VER 1.2 specifications.

If you are looking to replace a faulty board in an HP ProDesk 400 G1/G2 MT, this is a direct replacement.