Allows you to select which channels the radio monitors when the scanning feature is activated via a side key. 5. Writing the New Configuration
A computer running a compatible version of Windows (usually Windows 7, 10, or 11). How to Install and Use the Programming Software Follow these steps to get your radio set up: 1. Acquiring and Installing the Software
Before you begin, ensure you have the following hardware and software components:
Plug your programming cable into the PC. Install the correct USB driver. Open Windows Device Manager and check the "Ports (COM & LPT)" section to identify the assigned COM Port number (e.g., COM3). motorola smp 468 programming software
Executable installer (.exe) or compressed archive (.zip/.rar) Hardware Requirements
Pro Tip: Ensure the software version is compatible with the specific firmware version of your SMP 468. Newer software versions usually work with older radios, but the reverse is rarely true.
: A USB-to-serial cable with a 2-pin micro jack or the RKN4155 cable (common for business series) is required. Allows you to select which channels the radio
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
With the channel information screen loaded, you can now modify your operating frequencies. Channel Information Matrix
USB-to-Serial drivers. Ensure these are installed so your computer recognizes the cable as a COM Port. Connectivity How to Install and Use the Programming Software
Click . Do not disconnect the cable or turn off the radio until the progress bar reaches 100% and a "Write Success" prompt appears.
Now, standing on the edge of the pier, he switched to the new channel. The on top of the radio blinked green, confirming he was on the right frequency.