Sinotimer Svp-916 Manual Pdf !full! Jun 2026

The device features a dual LED display that shows both voltage and current readings in real time [11, 13]. The green indicator signals normal operation, while the red indicator alerts you to a fault condition [10].

Press SET repeatedly to cycle through parameters (voltage/current/time). Use the UP (▲) or DOWN (▼) keys to change the values.

Complete User Guide and Manual for the Sinotimer SVP-916 Adjustable Voltage Protector

remains connected. Ensure L and N are not reversed during wiring. Upstream Protection: This device does Sinotimer Svp-916 Manual Pdf

The is an adjustable, automatic over-voltage and under-voltage protection device. It features an integrated current display (ammeter) and voltage display (voltmeter). This device protects household appliances and industrial equipment from sudden power surges, voltage drops, and current overloads.

Snap the SVP-916 onto a standard 35mm DIN rail inside your distribution box. Input Connections (Top Terminals):

: Snap the protector onto a standard 35mm DIN rail inside a distribution box. The device features a dual LED display that

Ensure all screws are tight to prevent overheating.

The Sinotimer SVP-916 features adjustable custom programming parameters. To program the module, press and hold the key for 3 seconds to enter configuration mode. Use the UP and DOWN arrow keys to adjust numeric values, and press SET to cycle through the menu codes: Parameter Function Adjustable Range Default Value P01 Over-Voltage Protection Value 221V – 300V – OFF P02 Over-Voltage Recovery Voltage 220V – 299V P03 Over-Voltage Protection Action Time 0.1s – 10s P04 Under-Voltage Protection Value 150V – 219V – OFF P05 Under-Voltage Recovery Voltage 151V – 220V P06 Under-Voltage Protection Action Time 0.1s – 10s P07 Over-Current Protection Value 1A – Device Max (40A/63A/80A) Max Rating P08 Over-Current Protection Action Time 0.1s – 512s P09 Fault Recovery Delay Time 2s – 512s P10 Power-On Startup Delay Time 2s – 255s

Navigate to P12 to view the last 5 fault codes. UH: Over-voltage fault. UL: Under-voltage fault. IH: Over-current fault. Use the UP (▲) or DOWN (▼) keys to change the values

Available in 40A, 63A, and 80A models.

Press and hold the button for 3 seconds until the display flashes.