Epson — 1390 Resetter 2021

A message will pop up saying, "Please turn off the printer." Turn off your printer using its physical power button. Click OK on the computer screen.

Epson printers use internal porous foam pads to collect excess ink during setup, printing, and printhead cleaning cycles. Why Does Your Printer Stop Working?

Epson Chip Resetter: What It Is, How It Works & Best Alternatives

: Select "Particular Adjustment Mode" and then choose Waste ink pad counter . Initialization : Click Check to verify current counter levels. epson 1390 resetter

This is the preferred solution for heavy users, DTF (Direct-to-Film) converters, and sublimation printers.

Check the boxes for "Main Pad Counter" and "Platen Pad Counter". to see current levels, then click Initialization to wipe the counter back to zero. A pop-up will tell you to turn off the printer

⚠️ Disclaimer: Resetting the counter without replacing waste pads violates Epson's terms of service. Proceed at your own risk. This guide is for informational purposes only. A message will pop up saying, "Please turn off the printer

Modern users of the Epson 1390 often face an additional obstacle: Epson occasionally pushes updates that block the use of non-Epson cartridges or Continuous Ink Systems (CIS/DTF).

: Overrides the "Ink Out" message on cartridges that still contain physical ink but are marked as empty by the chip.

This is a common issue. It does not mean your printer is permanently broken. It simply means the internal waste ink counter has reached its maximum limit. Why Does Your Printer Stop Working

Turn your printer back on. The alternate flashing red lights should be gone, and the status light should turn solid green. Click Finish and close the software. Critical Warning: Hardware Maintenance Required

Click on "Particular adjustment mode".

Delete all pending print jobs from your Windows print queue.

Using the resetter is relatively straightforward, but it requires following specific steps to ensure the printer communication is successful. 1. Preparation

The term "Resetter" generally refers to the specifically designed for the SP 1390 model. This utility allows you to go beyond standard driver settings and interact with the printer’s internal EEPROM (Electrically Erasable Programmable Read-Only Memory). It is a service-level tool that technicians use to perform deep maintenance tasks.