If you prefer designing directly in CorelDraw, you will need to install the Redsail CorelDraw VBA plugin.
Once installation is finished, plug in the USB cable and turn on the plotter.
Redsail plotters do not design graphics natively; they rely on design software paired with a cutting output program. The two most common setups utilize WinPCSign/Artcut or a CorelDRAW plug-in. Option A: Installing Artcut Software redsail cutting plotter software installation
For any other cutting program, the process follows a similar logic:
Click the icon, open the settings menu, and map the output destination to your verified . Option C: SignMaster Setup Open SignMaster and navigate to the Vinyl Spooler . Click on the Connection tab. Select Redsail and your model from the dropdown lists. Set the Connection Type to Direct COM Port . Select your specific COM Port number . Set the Baud Rate to 9600 and click Apply . 5. Troubleshooting Common Installation Errors Error: "Cannot Open Port" or "Device Not Found" If you prefer designing directly in CorelDraw, you
Redsail does not provide native macOS software. Your options are:
If you prefer designing in CorelDRAW or Adobe Illustrator, you can install the Redsail driver directly as a printer device or use a cutting plugin like WinPCSIGN or CoCut. Open the menu in Windows. The two most common setups utilize WinPCSign/Artcut or
Never start a paid job without testing.
You often need to set the baud rate on the physical machine to match the software.
Setting up a Redsail cutting plotter requires proper software configuration to ensure precise vinyl cutting. This comprehensive guide covers the step-by-step installation process for drivers, core graphics software, and cutting plug-ins. Prerequisites and System Preparation
Follow the prompts to install the program. Insert the USB security dongle (if provided) before launching the software, or it will run in demo mode. Option B: Installing Easy Cut Studio (Recommended) Download the latest version from Easy Cut Studio. Run the installer and follow the wizard. Launch the software. Navigate to Cutter > My Cutter > Manage Cutters .