Some council services will be unavailable over the Christmas and New Year break.
Check if you need to apply or order before Friday 19 December 2025.
Quality] | Hks-va028-v2.0 [extra
typically follows these standard specifications for the 0.28-inch dual-meter series: Measurement Ranges : DC 0 – 100V.
Ensure the wires, especially the thick current-carrying wires, are securely connected. Short, thick wires are recommended for the high-current path. Conclusion
Based on HKS’s product naming conventions, this identifier most likely corresponds to a or a related electronic boost control accessory, specifically the HKS EVC (Electronic Valve Controller) series.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. hks-va028-v2.0
This component is designed for professionals and enthusiasts who refuse to compromise on precision. It’s particularly effective in environments where consistency high output are non-negotiable. Final Thoughts
Connect the thin yellow wire to the positive rail of the target high-voltage system.
If the circuit you are monitoring operates strictly between 4.5V and 30V, the HKS-VA028-V2.0 can draw its own operating power directly from the target source. typically follows these standard specifications for the 0
This comprehensive technical guide details the specifications, structural layout, wiring configurations, and practical applications of the HKS-VA028-V2.0 module. Key Technical Specifications The core appeal of the HKS-VA028-V2.0 Go to product viewer dialog for this item.
Based on its classification alongside similar modules like the DSN-VC288 , the typical operating parameters include: : 0–100V DC.
Dual 3-digit 0.28" digital LED tubes (typically Red for Voltage, Blue for Current) DC 0V to 100V Current Measurement Range DC 0A to 10A (integrated built-in sampling shunt) Module Supply Voltage ( VCCcap V sub cap C cap C end-sub ) DC 4V to 30V (absolute maximum input ceiling) Self-Current Consumption ≤is less than or equal to 20mA under normal operating load Measurement Precision ±plus or minus ±plus or minus 1 digit tolerances) Resolution Adjustments Voltage: 0.1V Data Refresh Speed Approximately 300 milliseconds per refresh cycle Physical Dimensions Required Panel Cutout Roughly 45.5mm 26.5mm (snap-in build) Operating Temperature -10°C to +65°C Hardware Layout & Interface Wire Harnesses The rear panel of the HKS-VA028-V2.0 Go to product viewer dialog for this item. Conclusion Based on HKS’s product naming conventions, this
The versioning part of the identifier, "v2.0," is particularly important. It indicates that there has been at least one major update or iteration of the product or software. Versioning helps in tracking changes, updates, and improvements. It also aids in ensuring compatibility and in troubleshooting, as knowing the version can help in identifying which features are available and which bugs have been reported.
Connect the thin red and black wires directly to your isolated 12V supply.
DC 4–30V (Note: Exceeding 30V on the power input will damage the unit). Accuracy: Typically ±1%. Dimensions: Approximately 48mm x 29mm x 26mm. Wiring Guide The device usually comes with two wire harnesses: Thin Wire Harness (Power & Sensing): Red: Power supply positive (4–30V). Black: Power supply negative/ground.
The module features a split across two separate wire harnesses. Proper layout is essential to avoid ground-loop failures or shorting the circuit.