Nalco Maxitreat: 22045 Sds

Wash hands thoroughly after handling. Remove and wash contaminated clothing before reuse.

Based on the Maxitreat 22045 Safety Data Sheet, here are the typical characteristics: Description Appearance Colorless to Hazy/Light Yellow pH (100%) Very High ( ≈14is approximately equal to 14 Solubility in Water Completely Soluble Specific Gravity Note: The very high pH ( ) indicates that the product is strongly basic (alkaline). Safe Handling and Storage

: Repeated ingestion or inhalation of sulfites can cause a severe allergic reaction in asthmatics, including breathing difficulties, skin flushing, rashes, and degradation of the upper respiratory tract. First Aid Measures

Avoid release into the environment, such as drains, surface water, or ground water.

Nalco MaxiTreat 22045 is an engineered chemical solution designed to manage and optimize industrial water systems. Typically, products within the MaxiTreat line serve to: nalco maxitreat 22045 sds

According to the SDS, Nalco MaxTreat 22045 is a liquid product with a pH range of 9-11 and a specific gravity of 1.2-1.3. The product contains a proprietary blend of chemicals, including surfactants, dispersants, and corrosion inhibitors. The SDS identifies several potential hazards associated with Nalco MaxTreat 22045, including skin and eye irritation, respiratory tract irritation, and gastrointestinal problems if ingested.

In case of accidental exposure to Nalco MaxiTreat 22045, immediate action is necessary.

A strong alkaline (caustic) agent.

Can cause permanent tissue damage and chemical burns upon contact. Immediate action is required to prevent blindness. Causes severe chemical burns and permanent skin damage. Ingestion: Wash hands thoroughly after handling

Acid- and alkali-resistant rubber aprons, protective suits, and steel-toed chemical boots.

As a corrosive material, waste from this product (typically with a pH ≥12.5is greater than or equal to 12.5

The Nalco Maxitreat 22045 SDS is a detailed document that provides critical information on the safe handling, use, storage, and disposal of the product. The SDS includes the following key sections:

Best for: Safety managers, water treatment professionals, and facility supervisors. Safe Handling and Storage : Repeated ingestion or

Spills must be managed immediately by designated spill-response personnel using appropriate PPE.

Not typically required under normal handling conditions. Use a mask if mists or aerosols are generated. 6. Physical and Chemical Properties (Section 9)

Most oxygen scavengers are alkaline or corrosive. The SDS will clearly label the signal word (Warning or Danger) and pictograms. For Maxitreat 22045, look for the corrosion pictogram. This section dictates the Personal Protective Equipment (PPE) required—often including chemical splash goggles and nitrile or neoprene gloves.