Enter privileged EXEC mode: enable (default password is Cisco ). Run the archive command:

ap: set IP_ADDR ap: set NETMASK ap: set DEFAULT_ROUTER Use code with caution. Copied to clipboard : ap: tftp_init ap: ether_init ap: flash_init Use code with caution. Copied to clipboard

A standard RJ45-to-DB9 or USB console cable to view execution progress via terminal emulators (e.g., PuTTY or Tera Term). 2. Configure the TFTP Hosting Environment

Temporarily disable Windows firewall or ensure UDP port 69 is allowed to prevent connection timeouts. Cisco Community Step-by-Step Conversion Guide 1. Setup TFTP Server Extract the

The file is a specific Cisco IOS software image used to convert Cisco Aironet 1700, 2700, and 3700 series Access Points (APs) into Autonomous Mode . This conversion allows the AP to operate as a standalone device without requiring a Wireless LAN Controller (WLC). Core Functionality

AP 3702i - IOS version for Autonomous Mode - Cisco Community 06-Aug-2015 —

: Indicates the delivery structure. This is an archive format containing the base IOS system image, HTML graphical interface assets, and the necessary radio driver subsystems.

: Specifies the second-generation Cisco Access Point hardware platform group, covering major models like the Aironet 2702i and 3702i .

The Cisco Aironet AP image ap3g2-k9w7-tar.153-3.JBB1.tar is a specialized firmware designed specifically for converting 802.11n "ap3g2" platform access points. While the conversion process is irreversible through standard means, the ability to flash autonomous firmware extends the life of these otherwise controller-dependent devices, allowing them to operate in SOHO or small business environments without expensive wireless LAN controllers.

: Identifies the image type as Autonomous (standalone). In contrast, "k9w8" denotes a Lightweight image that requires a controller. 153-3.JBB1 : Refers to Cisco IOS Release 15.3(3)JBB1

The filename Ap3g2-k9w7-tar.153-3.jbb1.tar refers to a specific for the Cisco Aironet 1700 Series (and compatible 2700/3700 series) Access Points.

: Software applications like Tftpd64 (Windows) or standard built-in tftp-hpa (Linux) are required to host the image.

Press and hold the button on the front or side of the AP. Reconnect the power.

: