Programming a device like the Gilbarco SK700 requires a detailed understanding of its technical specifications, the site's operational requirements, and compliance with relevant security standards. Always refer to the official documentation and seek support from the manufacturer or qualified professionals if needed.
Electronic calibration is performed to ensure the dispensed volume matches the displayed volume. Set the switch to the position.
Most advanced programming requires a physical security switch or PIN.
The dispenser lost its connection to the indoor POS. Inspect the communication wiring shield for grounding issues or check if the forecourt controller crashed. Gilbarco Sk700 Programming Manual
When the SK700 memory becomes corrupted or major hardware changes occur (such as replacing the central processor board), technicians must choose between two initialization methods. Warm Start
The display will show a 0 , indicating the unit is ready for a Function Code (FC) or Command Code (CC). 3. Essential Command Codes (CC)
Remove the link from the cold start position and place it back to the normal operating position, keeping the switch in the CAL position. 3. Core Programming Parameters (After Cold Start) Programming a device like the Gilbarco SK700 requires
For example, all meter calibration functions are accessed using CC 76 (Command Code 76), followed by a that specifies the particular task:
The programming manual is an essential tool for diagnosing system issues. The SK700 series has a robust error code system that is interpreted using the manual. Common error codes include:
Used to scroll through functions, save parameters, or escape sub-menus. Set the switch to the position
Verify which physical communication board is installed.
Perform a master cold start; replace main board if persistent. 6. Cold Start vs. Warm Start Procedures
Accessing basic totals, unit prices, and shifts.
Input the authorized PIN code via the keypad. (Default codes are found in the confidential appendices of your specific regional manual; these should always be changed upon commissioning).
The Gilbarco Sk700 system consists of a central processing unit (CPU), a user interface, and various peripherals, such as fuel dispensers, payment terminals, and printers. The system runs on a proprietary operating system and is programmed using a specific set of commands and procedures.