Staples 17466 Laminator Manual High Quality Jun 2026

Over time, adhesive can build up on the internal rollers, causing jams. Turn off and unplug the machine.

Up to 9.5 inches (Accommodates Letter, Legal, and A4 sizes) Heating System: Dual roller system Temperature Modes: Thermal (Hot) and Cold Pouch Compatibility: 3 mil and 5 mil thicknesses Warm-up Time: Approximately 3 to 5 minutes Anti-Jam Feature: Manual jam release lever Important Safety Precautions

Place the unit on a flat, stable, and heat-resistant surface.

If you have lost the manual, follow these verbatim instructions as if they came from the original guide. staples 17466 laminator manual

The machine becomes hot during operation; do not touch the casing near the exit slot.

The pouch was fed at an angle, entered open-side first, or the document was too thick.

use alcohol, solvents, or abrasive pads. Over time, adhesive can build up on the

As the laminated pouch emerges from the back of the machine, use your free hand to support it. This prevents the hot, pliable plastic from bending or curling on the output tray.

Place your document inside a Staples laminating pouch, ensuring the document is centered and aligned with the sealed edge. Insert the pouch, , into the entry slot. Allow the machine to pull the pouch through completely. Do not pull the pouch, as this can cause jams or wrinkles. Cold Lamination Steps

Align the pouch with the feed guides on the laminator's throat to ensure straight entry. Crooked entry is a leading cause of wrinkles and jams. Insert the sealed edge of the pouch first, feeding it slowly and steadily. Let the rollers catch the pouch — do not push. The laminator will pull the pouch through at approximately 9–10 inches per minute. If you have lost the manual, follow these

Understanding your machine's physical limits prevents overheating, jams, and internal damage. Staples 17466 / SPL-TX90 Maximum Document Width: 9 inches (Letter size) Pouch Compatibility: 3-mil and 5-mil thickness Heating Mechanism: Thermal (Hot) lamination Warm-up Time: Approximately 3 to 5 minutes Indicators: Power LED (Red), Ready LED (Green) Safety Feature: Jam release lever (located on the back) Setup and Safety Precautions

Switch the machine to the "Cold" setting if available (some models require specific cold pouches). Follow the same loading procedure as hot lamination. 3. Important Operating Tips (Best Practices)

The (often associated with 9-inch thermal/cold models) is a popular, reliable, and user-friendly machine found in home offices, classrooms, and small business environments. It is designed to provide professional-looking lamination for documents, ID cards, and photos.

: After the laminated item exits the rear of the machine, it should be left on a smooth, flat surface for several seconds to cool properly and avoid warping.