Upgrading the software on your is a straightforward process handled via the device's USB port. This handheld combo meter supports DVB-S/S2/T/T2/C and MPEG-4 H.265 (8-bit) decoding. Preparation Checklist
Operating on outdated firmware can lead to signal drops, incorrect transponder data, and system freezes.
: Ensure the 7.4V/3000mAh battery is fully charged or the unit is connected to the DC 12V/1.5A power adapter to prevent power loss during the flash process. Standard Upgrade Procedure Satlink Ws-6979 Software Upgrade
Navigate using the arrow keys to the or Tools sub-menu (the naming convention varies slightly across regional firmware versions). Select Upgrade By USB (or USB Update ) and press OK .
Once the progress bar reaches 100%, the meter will display a success message and automatically reboot. After rebooting, safely remove the USB drive. Upgrading the software on your is a straightforward
: Plug the USB drive into the USB port on the side of the device. Navigate to Upgrade Menu : Power on the device. Press MENU on the keypad to reach the main interface.
Satlink WS-6979 Software Upgrade: The Complete Step-by-Step Guide : Ensure the 7
Format the flash drive to the file system using your computer. The device will not recognize NTFS or exFAT formats.
Insert the prepared USB flash drive into the USB port located on the side of the meter. Power on the device. Step 3: Navigate the System Menu Press the button on the keypad.
Here is a breakdown of its key features:
