Nitocote+pe135+msds+best -

Over-coating times will vary based on the substrate temperature and ambient conditions. At 20°C (68°F), a typical coating becomes tack-free in approximately 6 hours and reaches full cure after 7 days.

The primary active ingredients and functional mineral matrices listed in the Fosroc Nitocote PE135 Technical Datasheet include:

Note: Full chemical and mechanical cure requires . 5. Step-by-Step Application Best Practices nitocote+pe135+msds+best

While the material is water-based and eco-friendly compared to coal-tar alternatives, liquid handling requires care:

: Flush immediately with plenty of clean water for at least 15 minutes and seek prompt medical attention. Over-coating times will vary based on the substrate

Unlike traditional epoxies, its hydrophobic nature allows for application on slightly damp concrete surfaces.

This guide is for informational purposes. Always consult the current and Product Data Sheet (PDS) from Fosroc before handling or applying Nitocote PE135. Safety and performance depend entirely on correct preparation, application, and PPE use. This guide is for informational purposes

You must obtain the current Safety Data Sheet (SDS) from your regional Fosroc supplier or website (e.g., fosroc.com). The summary below is for awareness and does not replace the legally required SDS.

Nitocote PE135 is a single-component, water-based, hydrophobic polyester resin coating designed specifically for protecting concrete surfaces. It is used extensively in industrial, civil engineering, and infrastructure projects to provide a durable, chemical-resistant barrier.

Fosroc Nitocote PE135 is a high-performance, single-component protective coating based on . It is primarily used for waterproofing and corrosion protection of concrete substrates, especially in underground structures and foundations. Key Performance Features

To maintain the product's integrity and ensure it performs as expected, proper storage is essential. The general recommendation for Fosroc's Nitocote range is to store the product in its original, unopened containers in a dry environment at temperatures between . Under these conditions, the shelf life is typically 12 months .

nifc.gov

An official website of the Department of the Interior

Looking for U.S. government information and services? Visit USA.gov

The National Interagency Fire Center is committed to making its information and communication technologies accessible to individuals with disabilities by meeting or exceeding the requirements of Section 508 of the Rehabilitation Act of 1973, as amended. To meet this commitment, we continue to monitor and update our content to make sure our documents meet these standards.