While the exact labeling may vary slightly between the standard model and the "Plus" version, the core functions are present across all models.

Plug the AC adapter into the wall and the DC input on the scale.

If the scale provides inconsistent readings, it may need calibration. You will need a certified to perform this accurately. Turn the scale OFF .

Includes standard Tare (zeroing), Hold (freezing the weight on screen), and Memory for cumulative weighing.

A: The Wedo Paket 50 Plus uses a 6V / 500 mA adapter. The standard model uses a 9V / 300 mA adapter. You can purchase a replacement from the same retailer where you bought the scale, by searching for the specific model number (e.g., 507605005 for the Plus model), or by using a universal adapter set to the correct voltage.

Press the ON/OFF button. The display will show "00000" and then stabilize at 0g. 3. Operating Instructions (Weighing and Functions) A. Basic Weighing (Weight Mode) Ensure the scale is on a flat surface and turned on.

We hope this comprehensive guide has answered all your questions about setting up, using, and maintaining your Wedo Paket 50. If you've followed the troubleshooting steps and still face an issue, don't hesitate to reach out to WEDO's customer support or the retailer where you purchased the scale. Happy weighing!

Set (MENU → Speed): 1 (slow) to 5 (fast). Start with 3.

: Wipe down the polished stainless steel plate with a microfiber cloth dampened with warm water and a drop of dish soap. Do not use steel wool, abrasive scouring pads, or harsh chemical solvents like acetone. Troubleshooting Error Codes

Remove the weight and restart the scale. Calibration is now complete. 5. Maintenance and Troubleshooting Error Codes and Meanings

The Wedo Paket 50 may display error messages to indicate a problem.

Follow these steps to get your scale ready for its first shipment.

Critical: Do not connect red to ACC switched power unless you want the device to shut down when ignition is off.

Connect the platform to the digital readout unit using the 9-pin D-Sub connector cable provided. Ensure the connection is firm to prevent data transmission errors.