Even the best technology can sometimes have issues. Here are solutions to some common problems with the XP-420B.
Are you looking to set up your Xprinter XP420B on WiFi? Look no further! This article will walk you through the process of connecting your Xprinter XP420B to your wireless network, allowing you to print from any device on the same network.
Wireless printing from mobile devices typically requires a dedicated app rather than standard AirPrint or Android print services. App Recommendation: "Print Label" app (available on Google Play/App Store). Connection Process: Open the app and go to to change the connection method to Enter the printer's IP address (found during the Windows setup or via a self-test page). Select your document (e.g., a PDF waybill) and tap Connect WiFi Printer Troubleshooting & Tips XP-420B Thermal Label Printer - Xprinter xprinter xp420b wifi setup
Connect the power cable and flip the power switch at the back to the "On" position.
After the driver is installed and the printer is on your network, it is wise to perform a test. Even the best technology can sometimes have issues
Your Wi-Fi network name (SSID) and password.
The initial phase of the setup involves distinguishing between the two primary Wi-Fi operational modes of the XP-420B: and AP Mode (Access Point) . For most users, Station Mode is the goal, as it connects the printer directly to an existing local router, allowing every device on the same network to print. Conversely, AP Mode is a temporary state where the printer creates its own unsecured network (e.g., "XP-420B_XXXX") for direct phone-to-printer connections. To begin the Station Mode setup, the user must first power on the printer and hold the feed button while inserting the USB cable (connected to a Windows PC) to enter "Wi-Fi Configuration Mode." Without this specific sequence, the printer will default to USB-only operation. Look no further
Connect the printer to your computer via the USB cable. Ensure the power light is solid green (indicating the printer is ready). Once the USB is plugged in, your computer should automatically recognize the device, though you may need to select the driver during the software setup phase.
Assign a specific, fixed IP address (e.g., 192.168.1.100 ) to avoid connectivity issues.
: Download the official Xprinter Diagnostic Tool (often called Diagnostic Tool or Dynasty Tools ) from the Xprinter website .
Have you already downloaded the , or do you need links?
"I was lucky to trial PhysisTM early on when working with one of its developers. Right from the start, I've found it simple to use, quick and surprisingly accurate when I compare it with my usual calculation, having read bone age x-rays for 20+ years."
PhysisTM is a convenient and reliable method to rapidly assess a patient’s bone age at the point of care. I used to flick back and forth through the Gruelich and Pyle atlas until I found an image that matched the patients X-ray, but now I can get an answer I know is accurate within a few seconds.
