While in programming mode, press 0 + [New 6-Digit Code] + [Confirm New 6-Digit Code] + # . 2. Managing Users (Cards and PINs)
Connect the from the keypad to the Power Supply +12V .
For models: V2000-C (Standard), V2000-C Pro
Understanding the electrical thresholds and internal operating logic ensures hardware safety and code compliance during installation. 12VDC ± 10% Maximum Relay Output: 12VDC / 2A (Unlock relay) Electric Lock Max Load: 3A Alarm Relay Rating: Up to 20A RFID Carrier Frequency: 125KHz EM standard cards Proximity Sensing Distance: 3 cm to 8 cm Memory Bank Storage Capacity: Up to 1,000 unique user cards
The unit emits a clear confirmation chirp. Repeat steps 3–4 for more cards or hit the exit key. 4. Setting Up Access Modes v2000-c user manual
The is a popular standalone RFID access control keypad designed for single-door security management . This hardware supports up to 2000 users and offers verification via EM proximity cards, unique passwords, or a combination of both. It is widely deployed by installers due to its built-in Wiegand 26 interface, integrated doorbell button, and high-sensitivity reading speeds under 0.1 seconds.
The hardware relies on a built-in RFID reader alongside a standard physical input matrix keypad. The core circuit board runs on industrial-grade microcontroller architecture designed for fast verification and standalone logic processing. Specification Target Parameter 12VDC ± 10% Operating Current < 100mA (Idle current draw) Unlock Relay Rating 12VDC / 2A Maximum load capacity Electric Lock Output Max 3A Peak load Supported Card Format 125KHz EM standard proximity cards Read Distance Range 5cm to 15cm from sensor face Memory Capacity Up to 1000 user tokens / cards Open Door Time Delay 1 to 99 seconds (User adjustable) Terminal Block Wiring and Integration
Wiegand 26 input/output, exit button, and doorbell trigger
The is a highly secure, single-door entry controller utilized in commercial properties, residential apartments, and office environments. This compact security device utilizes 125KHz EM proximity RFID technology and an integrated physical keypad to tightly manage authorized building entry. While in programming mode, press 0 + [New
Undo the specialized bottom screw to detach the wall bracket.
If an employee loses a security fob, clear their access block quickly to protect the building perimeter: Enter programming mode →right arrow Press [3] →right arrow
Refer to this pinout distribution derived from the uAmper RFID Access Control Manual to interface with power supplies, exit push buttons, and doorbell chimes: Wire Color Named Function Terminal Description 12V+ 12V DC Regulated Power Input Black GND Ground Negative Power Rail Yellow OPEN Request-to-Exit Push Button (Switches to GND) Blue NO Relay Normally-Open Contact Purple COM Relay Common Terminal Connection Orange NC Relay Normally-Closed Contact Pink / Purple BELL Closed contact paths out to a Doorbell Unit Step-by-Step Master Programming Manual
Completely sever the main electricity feed to power off the device. exit push buttons
access control system functions securely and efficiently. For additional product-specific features, consider checking the User Manual of V2000-C Access Control Keypad or the broader resources available via Obohands Product Downloads . If you are setting this up for the first time, let me know:
It is highly recommended to change the default password immediately during installation to prevent unauthorized tampering. Enter Programming Mode. Press the 1 key. The Orange LED will turn on. Input a new custom .
The official manual for this specific device is the from March 2013.