While updating your DSL-2740U firmware to version ME-1.03 is generally a smooth process, you may encounter some issues. Here are some common problems and their solutions:
D-Link Worldwide Support Search to match your specific H/W revision. Wireless N300 ADSL2+ Wi-Fi Router DSL-2740U - D-Link
Locate and select the extracted ME-1.03 firmware file from your computer.
: Features a built-in Stateful Packet Inspection (SPI) firewall and hacker attack logging to protect against Denial of Service (DoS) threats.
With the router on, press and hold the button on the back for 10 seconds. Reconfigure your internet settings.
ISP networks across the Middle East use distinct virtual path identifiers (VPI) and virtual channel identifiers (VCI). The ME-1.03 firmware includes pre-configured presets for these regional parameters, allowing for faster initialization when a user selects their local ISP during configuration. 2. Hardware Revision Constraints Wireless N300 ADSL2+ Wi-Fi Router DSL-2740U - D-Link
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
The router will automatically reboot. The power LED will flash for up to 2 minutes. Wait until it becomes solid.
The hardware running the ME_1.03 firmware is built as an all-in-one gateway. It handles broadband input, routes traffic, and shares Wi-Fi across local devices.
: The device typically utilizes an RTL8676S processor with 32MB of RAM and 4MB of flash memory.
This version refines the Point-to-Point Protocol over Ethernet/ATM. It resolves the infamous “PPP idle disconnect” issue that plagued earlier versions, where connections would drop after 20–30 minutes of inactivity.
If you are currently running a version lower than ME-1.03 (e.g., 1.00, 1.01, or 1.02), upgrading is highly recommended for several reasons:
To get the best speed and range out of your 300Mbps wireless connection.
Minimizes the threat of external attacks by hiding internal network IP addresses from the public internet.