Acer Q65h2-am V1.1 Manual Verified [ iOS Genuine ]
5x SATA II (3.0Gb/s) connectors (Note: some revisions may feature 1x SATA III and 4x SATA II). Rear I/O Ports: 1x VGA, 1x DVI-D, and 1x DisplayPort 6x USB 2.0 ports 1x RJ-45 Gigabit LAN port (Intel) PS/2 ports for keyboard and mouse 1x Serial (COM) port Front Panel Connector Pinout
You need the manual to know which jumper does what. Here are the three jumpers on the Q65H2-AM v1.1:
: 4 x 240-pin DDR3 DIMM slots, supporting up to 16GB of 1333 MHz non-ECC, un-buffered memory. Form Factor : Micro-ATX. Expansion Slots : 1 x PCI Express x16 (2.0) 2 x PCI Express x1 Front Panel Header Pinout
Date: March 23, 2026.
Install identical RAM sticks into matching colored slots (Slots 1 & 3, or Slots 2 & 4). acer q65h2-am v1.1 manual
Realtek High Definition Audio & Intel Gigabit LAN Controller Processor and Memory Installation Processor Compatibility
Acer Q65H2-AM V1.1 Motherboard Manual: Specs, Support, & Driver Guide
Bottom right corner. Labeled "F_PANEL" (6x2 pins, but pin 10 is missing).
Connecting a standard case to this proprietary OEM board requires matching the specific 14-pin layout. The standard configuration for this series is: HDD LED (Polarized: Pin 1 is Positive). Pins 2 & 4: Power LED (Polarized: Pin 2 is Positive). Pins 5 & 7: Reset Switch. Pins 6 & 8: Power Switch. Pins 12 & 14: LAN Activity LED (optional). Pin 10: Usually absent (key pin). Rear I/O Connectivity Video: VGA, DVI-D, and DisplayPort. 5x SATA II (3
Are you planning to into a new case or upgrade the processor ? ECS Q65H2-AM (V1.1) - The Retro Web
Head directly to the official Acer Drivers and Manuals page.
While a direct "Q65H2-AM" manual isn't readily available, Acer bundled the motherboard's technical documentation into the service manuals of the complete PC systems. These are your primary resources:
Below is a compiled from common specs and BIOS/jumper details for the Q65H2-AM v1.1 board. Use it as a reference. Form Factor : Micro-ATX
Ivy Bridge CPUs (like the i5-3470) are physically compatible with the LGA 1155 socket but require a late-stage custom BIOS update to work. Attempting to boot an Ivy Bridge CPU without this update results in a black screen and no POST. Memory Population Guidelines
The front panel header is typically a 14-pin or standard 9-pin block located on the bottom-right corner of the PCB. Connect your case switches and LEDs using this layout: : Hard Drive Activity LED (HD_LED + / -) Pins 2 & 4 : Power LED (PWR_LED + / -) Pins 5 & 7 : Reset Switch (RESET_SW) Pins 6 & 8 : Power Switch (PWR_SW) Pin 9 : Reserved / Empty Pin 10 : Key (No pin) 2. Power and Cooling Connectors Main Power : 24-pin ATX Power Supply connector.
| Feature | Specification | | :--- | :--- | | | Micro-ATX (24.4 cm x 24.4 cm) | | Chipset | Intel Q65 Express (vPro support) | | CPU Socket | LGA 1155 | | Supported CPUs | Intel Core i7/i5/i3 (Sandy Bridge & Ivy Bridge* with BIOS update) | | RAM Slots | 4 x DDR3 DIMM (Dual Channel) | | Max RAM | 16GB (4GB per slot) / 32GB with v1.1+ BIOS | | RAM Speed | DDR3 1066 / 1333 MHz (1600MHz downclocks) | | SATA Ports | 4 x SATA II (3Gb/s) + 2 x SATA III (6Gb/s) | | Expansion Slots | 1 x PCIe x16, 1 x PCIe x1, 2 x PCI | | Rear I/O | VGA, DVI-D, 4x USB 2.0, 2x USB 3.0, LAN, Audio jacks | | Power Connector | 24-pin ATX + 4-pin CPU |
Understanding the physical and electrical limitations of your motherboard prevents hardware damage during upgrades. Component / Feature Specification Micro-ATX (mATX) Chipset Intel Q65 Express Socket Type CPU Support 2nd Generation Intel Core i3 / i5 / i7 (Sandy Bridge) Memory Slots 4 x 240-pin DDR3 DIMM slots Maximum RAM Up to 16 GB (4 x 4GB modules) Memory Type Non-ECC, Unbuffered DDR3 1333 / 1066 MHz Storage Interfaces
Connecting a new case to this board requires identifying the front panel header pins. According to community documentation and standard Acer/ECS layouts, the 14-pin header (with pin 10 often missing) typically follows this pattern: HDD LED (Polarized: Pin 1 is Positive +) Pins 2 & 4: Power LED (Polarized: Pin 2 is Positive +) Pins 5 & 7: Reset Switch (Non-polarized) Pins 6 & 8: Power Switch (Non-polarized) Pins 12 & 14: LAN LED (If supported by your case) I/O and Internal Connections