Simco — Fmx002 Manual Top

One of the "hidden" manual features of the FMX-002 is its ability to check (offset voltage). By attaching a specific metal plate, you can measure up to +/- 200V to ensure your ionizers are operating correctly and not creating their own charge imbalances. Quick Specs at a Glance Measurement Range: Up to +/- 20.0 kV. Response Time: 1 second.

from the test surface. The FMX-002 uses two LED guide ring lights to assist; when the two light beams overlap into concentric circles, the device is at the correct distance.

: It detects static charge potentials up to ±19.99 kV at a standard distance of 25mm.

If you are looking for the "manual top" essentials—the critical operating procedures and maintenance tips—this guide covers everything you need to get accurate readings. 1. Overview of the Simco FMX-002 simco fmx002 manual top

Attach the supplied grounding lead to a known ground source. This is critical for accurate measurements . Activate IB Mode: Press the blue IB button.

To ensure you get the most accurate readings every time, here are the top operational "pro-tips" straight from the manual's best practices. 1. The Magic Distance: 25mm (1 inch)

Effective use of the FMX-002 requires specific positioning and grounding to ensure reliable data. Calibration of Distance One of the "hidden" manual features of the

Moves right (red) for positive static charges; moves left (blue) for negative static charges.

You can find detailed calibration services and support via Micro Precision or consult the official Simco-Ion documentation. Simco FMX-002 Electrostatic Fieldmeter Calibration

0 to ±1.49 kV (Low range); ±1.0 kV to ±20.0 kV (High range) Measuring Distance: 25 mm ± 0.5 mm (1 inch) Accuracy: ±10% Response Time: 1 second

Indicates a positive static charge.

This article dives deep into the —exploring its function, how to use the top-mounted controls for manual mode, troubleshooting common sensor issues, and why proper handling of this component is critical for complying with ANSI/ESD S20.20 standards.

20kV (20,000V) at a distance of 25mm [1]. It is widely used by ESD coordinators to verify that ionizers are working correctly and to map electrostatic hazards in the workplace. Key Features

If you are acquiring new equipment, the FMX-003 is the worthy successor. However, for those still relying on a well-maintained FMX-002, following the principles outlined in this manual will ensure it continues to be a vital part of your ESD control program.

Allows for data logging or connection to an oscilloscope.