If you have the small green or blue that plugs directly into the iPROG’s 8-pin header or RJ45-to-clip cable, its pinout is:
Widely found in modern engine control units (ECUs) and airbag modules. CS (Chip Select). Pin 2: SO (Serial Data Output / MISO). Pin 3: WP (Write Protect). Pin 4: GND (Ground). Pin 5: SI (Serial Data Input / MOSI). Pin 6: SCK (Serial Clock). Pin 7: HOLD (Suspends serial communication / tied to VCC). Pin 8: VCC (Power Supply). 3. MicroWire Series (e.g., 93C46, 93C56, 93C66, 93C86)
The exact pinout depends on which you have (e.g., SOIC8, SOP8, DIP8, SOP16, etc.). However, the most common request is for the SOIC8/SOP8 clip adapter that connects to the iPROG main unit. iprog eeprom adapter pinout portable
Used for dashboard clusters (e.g., BMW E39, VW Golf 4).
For your wallet or phone background, here is the condensed reference: If you have the small green or blue
and is frequently used for automotive tasks like resetting airbags or calculating pin codes. AliExpress iProg EEPROM Pinout & Wire Colors
The hardware pinout is useless without the correct software setup. For portable work, use or iProg 1.45 (Most stable for clones). Pin 3: WP (Write Protect)
Connect the SOIC8 clip to the target EEPROM on the PCB. Ensure Pin 1 (marked with a dot on the chip) aligns with the red wire on the clip.